Dometic HIPRO4000 Uživatelský manuál Strana 1

Type H20 / 60821 2660-01ENGLISHminiBarINSTRUCTIONS for USEINSTALLATION INSTRUCTIONST.B. 04/2005 MBHiPro 3000HiPro 4000HiPro 6000HiPro Vision

10Decor Panel MeasurementsThickness 0,4 mmChanging the decor panel4.104.10.14.10.2H x W (mm)HiPro 3000 492 x 294,5HiPro 4000 524 x 311,5HiPro 6000 533

115.15.35.455..005.2INSTRUCTION for USELeakage DetectionThe electronics carry out a leakage test after every defrosting period (every 24 hrs) by measu

12Interior LightAutomatic Door Control [ADC] (optional)1. Open the miniBar, check its contents and- if applicable- stock it up again.2. Reset the doo

Check List135.8Failure : No cooling (the aggregate at the back of the device is cold). Possible Cause Self Help Authorised Servicea.) The device plug

14Technical DataModel HiPro 3000 Model HiPro 4000 with cooling unit cover + feet Model HiPro 6000 with cooling unit cover

Environmental AdviceminiBars manufactured by Dometic GmbH are free from CFCs / HCFCs and fluorinated hydrocarbons. The cooling unit uses ammonia as th

Dometic GmbHIn der Steinwiese 16D-57074 Siegenwww.dometic.de/minibarwww.dometic.com© Dometic GmbH - 2003 - Subject to change without notice - Pr

21.0 INTRODUCTION 32.0 FOR YOUR SAFETY 32.1 Warnings and Safety Advice 32.2 Coolant 3 3.0 WARRANTY AND 3CUSTOMER SERVICE4.0 INSTALLATION 44.1

3INTRODUCTIONYou have made an excellent choice by choosing the Dometic miniBar. We are convinced that you will be satisfied with your new

4MLC-Code and serial number !You can find this information on the model label inside the device.INSTALLATIONThe Purpose of this ManualThe manual shows

5Installation4.51. The refrigerator must be level both directions.2. There should be 20mm clearance to the wall.3. Ventilation must be provided as sho

6SecuringConnecting the Device to the Electricity Supply The device must be connected to a properly earthedsocket in line with the relevant valid cou

7Attention: For GB only !Plug connection for United Kingdom onlyIf a 3-pin plug is used, it should be fitted with a 3 amp fuse, with other plug types,

Changing the Sliding Hinge4.81.2.3.4.Distance to cupboard door (A)A1. When closed, the cupboard door (A) must not lie against the rest of thesurroundi

Changing the Doorhang94.9Pull out LED, lay the cableinto the cable routing andinsert the LED at the oppo-site side.If the miniBar is equipped with the