
- 16 -
The filter absorbs grease in cooking fumes and re-
quir
es cleaning now and then. How often depends
on how much the cooker is used and for how much
the fan is in operation.
Remove and clean the filter regularly and do not
wait until the suction power of the fan begins to de
-
cr
ease noticeably. Note that an oversaturated filter
is a fire hazard.
The grease filter is mounted on the bottom cover.
TO CLEAN THE FILTER, FOLLOW THESE STEPS:
Disengage the bottom cover as described
in “Installation procedure”, steps 1-3.
Observe how the filter is installed before
removing. Lift filter straight up to remove.
Cl
ean the filter. Either by hand, using a soft
nylon brush, warm water and a little wash-
i
ng up liquid - or - in a dishwasher where
the filter should be placed with the short
side upright in the lower basket, ensuring
the spray arm is not obstructed. Wash using
a 65 °C (145-150 °F) programme.
Depending on the cleaning agent
used, cleaning the filters in a
dishwasher can cause permanent
discolouration to the surface. Ho
-
wever
, this will not affect the
functioning
of the filters in any way.
Allow the filter to dry.
Put back the filter.
Put
back the cover and secure with the
two screws and washers.
Please observe that the surfaces and controls are
susceptible to scratches and abrasions. All external
surfaces and controls can be cleaned using warm
water with a little washing-up liquid applied with a
sponge or cloth. Wipe the surfaces dry using a soft
cloth.
D
o not use cleaning agents contain-
ing
soda, acids, chlorides or solvents.
Avoid abrasive cleaning agents, e.g.
powder cleaners or cream cleaners and
abrasive sponges as these will damage
the surface material.
Komentáře k této Příručce